Site Category drop down menu for site selection pages.
Product drop down menu for going directly to product pages.
A large variety of hose barb and PVC fittings available. Also see Bulkhead FittingsUniseals and Air Accessories pages. For plastic tubing and drip system tubing see Tubing page Various PVC and nylon Bushings, Threaded Adapters,
Couplings, Elbows and Plastic Compression Fittings (JACO style), Hose Barbs, Garden Hose Adapters and Faucet adapters. CALL for specific requirements.
Plastic inline hose barb valves: barb x barb style
1/2” Plastic hose valve
5/8” Plastic Hose valve
3/4 Plastic hose valve
1” Plastic hose valve
FILL VALVES: (Barb x Thread Valves) Water Fill Valves are used to regulate flow back to the individual tanks from a
centralized water pump or gravity feed systems. Drip fittings for slow flow drip systems are available here. Fill valves are available in
1/4”, 3/4”, and 1” pipe sizes. All valves have a male NPT thread at the inlet side and output the water at a 90 degree angle or straight inline (as PBV1/2X1/4NPT), with a spigot style
outlet (no fitting). Uses a lever style adjustment with quarter or half turn actuation. CALL FOR QTY DISCOUNTS
1/4”NPT Fill Valve 1/4 MNPT thread x 7/16”-1/2” ID hose fitting can be drilled and tapped
directly into PVC pipe eliminates Tees and bushings for simpler installation. Threading Tap available here.
1/2” barb x 1/2” Male NPT thread use PVC or plastic bushing to adapt to your pipe thread size
9/16” (15mm) barb x 1/2” Male NPT thread use PVC or plastic bushing to adapt to your pipe thread size
5/8” (16mm) barb x 1/2” Male NPT thread use PVC or plastic bushing to adapt to your pipe thread size
3/4” MNPT Fill Valve
Quick Connect hose couplings:Barbed and threaded snap type quick connect. Good flow
characteristics in a plastic snap on hose coupler. Use these on long hose lengths to minimize coiling aggravation. Breaks long hoses into easy to manage lengths. Use garden hose ends for sink or spigot side quick